The thread locking machine is a kind of mechanical equipment, the operation of which requires a lot of attention, so as to avoid the occurrence of injuries caused by the machine. The development of thread locking machine is from manual to semi-automatic to fully automatic, different mechanical equipment in some details are different.
(1) Before starting the machine, we should do all the preparatory work, such as oil filling, rough checking the equipment condition, checking over the post route whether the oil is dirty;
(2) According to the book post format correctly adjust the nail distance and the number of nails, select the type and model of the nail line in line with the requirements of the national standard;
(3) Locking line machine storage posting to strictly comply with the error of the principle of process, procedures (in the bridge board to renew the posting) to be lifted in the hand before applying the brakes, to prevent personal accidents;
(4) lock the line after the booklets do not pile too much, so as not to cause a crash phenomenon;
(5) lock line machine (folding machine and lock line machine) before and after the car should be properly coordinated to avoid tearing or crashing;
(6) Once the locking line process is found to be faulty or quality problems, it is necessary to stop the machine in time to deal with it. It is strictly prohibited to start the machine to avoid accidents;
(7) Single shift (8 ~ 12 hours) cleaning once every two weeks, second or third shift (16 ~ 24 hours) cleaning once a week, cleaning time is generally 4 hours;
(8) Do a good job of handover to ensure the normal production of the next shift.
The above is the correct operation process of the thread locking machine.
