AUSCP computerized version of the program-controlled automatic locking machine locking line book post not flush with the head of the reasons
Mainly the following three cases:
First, the double-layer pull gauge belt gap is too large or too small, solution: adjust the upper and lower pull gauge belt gap, so that the book post can smoothly enter the 30mm, manually rotate the machine can pull the book post to the stall gauge, the paper post bending degree can not exceed 15 degrees.
Second, the speed of the accelerator wheel is too low, or too large between the upper and lower feed wheel, solution: adjust the acceleration, adjust the upper and lower feed wheel clearance.
Third, the feed wheel wear or deformation, solution: replace the feed wheel.
